What is the dipping method of powder coating in Zhejiang
Source: FounderDate: June 29, 2024; Browse:0
Powder coating can have excellent application effect, strong gloss of both plastic powder and powder coating, and strong environmental friendliness. Let's take a look at the immersion coating method with powder coating manufacturers.
Guardrail dipping powder has the characteristics of high glossiness, cleanliness, comfort, hygiene, non toxicity, and low temperature resistance. It is widely used as a civil environmentally friendly coating for wire mesh products such as guardrail nets and mesh sheets. This product is not only widely used in China, but also sold to various parts of the world such as Europe, America, and Asia.
Dip coating process of thermoplastic powder coating:
(1) Preheat the processed workpiece to 280 ± 20 ℃ (specific temperature to be determined according to the workpiece requirements).
(2) Immerse the preheated workpiece in a fluidized bed for 8 seconds and remove it. After plasticizing and leveling at a temperature of 180 ± 10 ℃ for 6 ± 2 minutes, it can be cooled with cold air or cold water.
Colors: red, green, black, white, gray, blue, etc. Special colors can be customized
The mesh size is 50, and the green one is our largest production volume.
PE thermoplastic powder coating is a special anticorrosive powder coating produced by taking polyethylene as the base material, adding a variety of functional additives and pigment combination processing. The coating layer has excellent chemical resistance, anti-aging resistance, impact resistance, bending resistance, acid resistance, corrosion resistance, crack resistance, and excellent adhesion. No matter the metal surface is galvanized or aluminized, the adhesion of materials is absolutely reliable, and the coating surface is smooth and decorative.
Storage conditions:
Polyester/TGIC powder coatings should be stored indoors in a dry and ventilated environment below 35 ℃, while avoiding direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or at the same temperature as the spraying equipment before use to avoid moisture regain. Under these conditions, the powder can be stored stably for 12 months. If the results meet the requirements, it can still be used after retesting.
Note: For powders with low-temperature curing and gloss below 40% (60 ° C), it is advisable to store them at a temperature below 30 ° C.
There is no need to worry about the color of powder coating. In addition to various basic colors, there are other special colors that can be customized, and the effect is also very good. The storage method is also very simple.
Guardrail dipping powder has the characteristics of high glossiness, cleanliness, comfort, hygiene, non toxicity, and low temperature resistance. It is widely used as a civil environmentally friendly coating for wire mesh products such as guardrail nets and mesh sheets. This product is not only widely used in China, but also sold to various parts of the world such as Europe, America, and Asia.
Dip coating process of thermoplastic powder coating:
(1) Preheat the processed workpiece to 280 ± 20 ℃ (specific temperature to be determined according to the workpiece requirements).
(2) Immerse the preheated workpiece in a fluidized bed for 8 seconds and remove it. After plasticizing and leveling at a temperature of 180 ± 10 ℃ for 6 ± 2 minutes, it can be cooled with cold air or cold water.
Colors: red, green, black, white, gray, blue, etc. Special colors can be customized
The mesh size is 50, and the green one is our largest production volume.
PE thermoplastic powder coating is a special anticorrosive powder coating produced by taking polyethylene as the base material, adding a variety of functional additives and pigment combination processing. The coating layer has excellent chemical resistance, anti-aging resistance, impact resistance, bending resistance, acid resistance, corrosion resistance, crack resistance, and excellent adhesion. No matter the metal surface is galvanized or aluminized, the adhesion of materials is absolutely reliable, and the coating surface is smooth and decorative.
Storage conditions:
Polyester/TGIC powder coatings should be stored indoors in a dry and ventilated environment below 35 ℃, while avoiding direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or at the same temperature as the spraying equipment before use to avoid moisture regain. Under these conditions, the powder can be stored stably for 12 months. If the results meet the requirements, it can still be used after retesting.
Note: For powders with low-temperature curing and gloss below 40% (60 ° C), it is advisable to store them at a temperature below 30 ° C.
There is no need to worry about the color of powder coating. In addition to various basic colors, there are other special colors that can be customized, and the effect is also very good. The storage method is also very simple.
- Previous article:How to prevent clumping of powder coating
- Next article:The baking temperature and time of powder coatings are carefully considered
