Plastic powder manufacturers talk about the storage methods of plastic powder

What is plastic powder? Plastic powder is a thermosetting powder coating used for electrostatic spraying. In fact, plastic powder is a very common material. When products such as steel wooden doors require spray coating technology, plastic powder is usually used for spraying. In fact, the basic processing method of plastic powder is to use high temperature to raise the temperature of the plastic powder, and then use air for compression to successfully spray the plastic powder onto the surface of the material. This is the processing method of plastic powder spraying. So what is the storage method for plastic powder?

1. It is necessary to avoid storing plastic powder in places that are easily contaminated by water, organic solvents, oil, and other materials, as this can cause it to become damp;

2. The plastic powder used should be kept away from sources of fire and direct sunlight. The best method is to store it in a well ventilated place with a temperature below 35 ℃;

3. After using plastic powder, do not expose it to the air at will. The correct approach is to cover or tighten the bag mouth at any time to prevent debris from entering;

4. In the powder spraying room, the concentration of floating dust should be controlled below the safe concentration as much as possible to avoid the danger of dust ignition and explosion;

5. The equipment used for painting operations must eliminate static electricity to prevent danger.

Overall, the storage of plastic powder can be summarized as placing it in a cool place, avoiding moisture, rejecting high temperatures and flames, and eliminating static electricity. Although plastic powder is only a powdery material, it is also very afraid of fire, air, and moisture. The quality of plastic powder also needs to be strictly controlled. Good plastic powder will not have impurities when used, so the products sprayed on it will be very smooth. If you need plastic powder, steel wood door plastic powder, or powder coating, you can contact the manufacturer by phone.

This article tags: