Contact

Message

Top

Service Hotline:

0579-87312581

hot-sale product:
APPLICATIONS
Contact Us

    Zhejiang Xingshun New Material Technology Co., Ltd

    Phone: 0579-87312581
    Mobile: 198-0589-9383 (Mr. Yang)
    Address: No. 139 Dengsheng Road, Lanxi Economic Development Zone, Jinhua City, Zhejiang Province
    Email: taotaoyang@zjxingshun.com
Current location:Home>News

News

How to remedy scratches caused by spray powder?

Source: FounderDate: June 29, 2024; Browse:0

Plastic powder is a material used in the spray coating process. Simply put, plastic powder is heated at high temperatures and sprayed onto the surface of the material by compressed air. Plastic powder spray painting is a surface treatment process widely used in fields such as vehicles, furniture, and electrical appliances. However, due to prolonged use or external forces, scratches are prone to occur, which can cause some confusion for people. Below we will provide a detailed introduction to the specific methods for repairing scratches caused by plastic powder spray painting, helping you easily solve this problem. The following is the specific repair process, let Xingshun's editor introduce it to you.

  

机器设备塑粉样图


1. Clean the surface layer

You need to use a gentle cleaning solution and water to clean the surface of the affected area to ensure complete removal of dust and impurities. Subsequently, use a clean towel or hair dryer to dry the surface.

2. Grinding and polishing

Next, you need to use high-quality grinding materials to gently polish and scrape the surface of the affected area. Remember to polish lightly to prevent further damage to the surface. After finishing, gently wipe it with a cleaning cloth.

3. Make up for it

Apply the same filling material as your original surface material to compensate for the scraped area. Apply a thin layer of filling material that aligns as closely as possible with the surrounding surface layer. After the filling material dries, use sandpaper to remove any uneven areas on the surface until the surface is smooth.

4. Spraying

After the natural drying of the compensating agent, carry out spray coating treatment. First, try spraying on the area without scratches to confirm if the color tone is consistent. Subsequently, gradually spray paint.

5. Drying treatment

The newly painted surface must be left to settle, allowing the particles on the surface to naturally sort. During the clinical process, it is necessary to keep the surface dry to prevent dust and impurities from entering. Next, dry the surface layer at an appropriate ambient temperature, followed by final combing and cleaning.

To address the issue of scratches caused by plastic powder spray painting, we repair it through a series of steps including cleaning, polishing, repairing, painting, and drying. In order to achieve good results, remember to use the same raw materials as the original ones for repair, while paying attention to the matching of color tones. Before repairing, it is necessary to ensure that the raw materials are dry and the surface is clean. After painting, wait for the color paste to dry naturally. By following these steps, we can calmly tackle the problem of scratches caused by plastic powder spray painting.